carbon steel pipe
high quality low carbon steel to ensure good resistance to strench and tensile;
from 20mm to610mm, large diameter range;
0.8~18.0mm;
3-12 meters to suit for different project requirement; according to customer requirements;
friction welded to ensure the adaptor and pipe connect tightly as a whole set the cylic extrusion-compression ensure reliabile pipe;
Share Us:
Product Description
The carbon steel pipe is perforated by steel ingot or solid round steel and then hot rolled, cold rolled or cold drawn.
Application
Carbon steel pipes are commonly used for mining minerals such as oil and natural gas; drilling engineering: drilling well walls, filter casings, geothermal transportation and various underground drilling, etc., which are widely used in the steel pipe industry and have high utilization rates.
Parameters Table
Material
S235, S275, S355,
A36, SS400,
Q195, Q235, Q345
Certificate ISO 9001:2008,SGS, BV, CCIC etc
Finish of pipe Hot dipped galvanized with zinc 220~260g/m2;
Pre-Galvanized with zinc 30~150g/m2
Painted with black/varnish lacquer;
Oil on the surface to prevent rust;
Bare pipe without painting:
Epoxy painting/FBE coating/3PE coating
Pipe End Plain end/ Bevel end;
Groove end;
Joint with flange;
Threaded on two ends
Marking As per client requirement or mill standard
Painting method: Spray paint
Packing Packed with bundle,or as customer’s requirment
Technology ERW (high - frequency welded), Seamless pipe
These may be products you are interested in.
Send An Inquiry
If you are interested in receiving more information or have a question regarding any of our products please fill out the form above and we will contact you within 24-48 hours.
Send now